HDPE CORRUGATED PIPE FITTINGS
TDR LINK
TDR™ LINK is here to turn pipes into working water management systems. Integrating custom-made and standard fittings with a wide range of accessories, we can deliver a flexible, efficient, and easy-to-install solution for any water management infrastructure project.
FEATURES
MATERIALS
TDR™ LINK fittings are manufactured from pipe using high-density polyethylene (HDPE) meeting the minimum requirements of cell classification 435420C/E for all pipe sizes as defined and described in ASTM D3350. Carbon black content shall be between 2 and 4%. Materials for 12″ through 60″ pipe sizes shall comply with NCLS test according to sections 9.4 and 5.1 of AASHTO M294 and ASTM F2306.
JOINT PERFORMANCE
The joining systems shall be of a design that preserves alignment during construction and prevents separation at the joints. Bell and spigot, external snap or split couplers are examples of typical designs. Watertight joints meet a 10.8 psi laboratory test in accordance with test.
INSTALLATION
Pipe and fittings shall be installed in accordance with ASTM D2321 and TDR’s published Installations Guideline. Minimum cover for trafficked areas shall be 12″ (0.3m). Maximum cover height depends on materials used for embedment and haunching. Please refer to TDR’s Technical.
APPLICATIONS
HDPE PIPE FITTINGS
FOR ADDITIONAL INFORMATION PLEASE CONTACT TDR PIPE®
Customer service phone: (830) 822 2184
www.tdrpipe.com/contact/
PRODUCTS
we are here for you
SMARTER.
STRONGER.
TOGETHER.
We believe in strong, reliable, and trustworthy relationships, that empower local and regional distributors and contractors to supply products and solutions to achieve success in every project.