SEWER PVC PIPE
TDR PVC® Sewer Series pipe delivers reliable performance for gravity sewer and drainage applications. Engineered to meet the stringent requirements of ASTM D3034, TDR PVC® Sewer Series is available in a full range of sizes from 4″ to 18″ to meet the demands of any project.
DESIGN FEATURES
STANDARDS
| PIPE | |
| ASTM D3034 | |
SEWER PVC PIPE SIZES
Recognizing that sewer systems vary significantly in scale and scope, we offer a comprehensive range of sizes and lengths within this product line. Whether you’re working on a small residential project or a large-scale municipal undertaking, our PVC Sewer Series can be tailored to your precise needs.
| SIZE, LENGTH AND TYPE | ||
| 4" | 14' Gasketed Joint 20' Gasketed Joint | SDR-26 SDR-35 |
| 6" | ||
| 8" | ||
| 10" | ||
| 12" | ||
| 15" | ||
SEWER PVC PIPE APPLICATIONS
OTHER PRODUCTS
Perforated
TDR Perforated Series
HDPE perforated pipe — high inflow rate, covers 70% of surface area
Polypropylene
TDR Pro
Corrugated polypropylene pipe engineered for high-performance drainage
CTS Pressure
TDR Forza Flow
CTS pressure pipe for residential and commercial plumbing applications
PP Fittings
TDR Link Pro
Polypropylene fittings compatible with TDR Pro corrugated systems
PVC
TDR PVC IPS Series
IPS series PVC pipe for pressure and non-pressure piping systems
PVC
TDR PVC SCH40
Schedule 40 PVC pipe for plumbing, irrigation, and conduit applications
Water Management
TDR Stormbreaker
Underground retention and detention water management system
Water Quality
TDR Brid-Jet
Water quality unit designed to filter and treat stormwater runoff
Frequently Asked Questions
What is TDR PVC® Sewer Series used for?
TDR PVC® Sewer Series is a PVC sewer pipe for gravity sewer and non-pressure drainage applications. It is available in 4-inch through 18-inch diameters.
What is PVC sewer pipe used for?
PVC sewer pipe is used for gravity sewer collection, non-pressure drainage of surface water, and industrial waste disposal. TDR PVC® Sewer Series is a sewer PVC pipe engineered to ASTM D3034 in 4-inch through 18-inch sizes.
What pipe is best for gravity sewer systems?
For gravity sewer systems, PVC sewer pipe is a common choice because it is corrosion-resistant, smooth, and watertight. TDR PVC® Sewer Series uses gasketed bell-end joints with Rieber gasket technology and meets ASTM D3034 (Type PSM).
What sizes and SDR does TDR PVC® Sewer Series come in?
It is available in 4-inch through 18-inch diameters in SDR 35 (pipe stiffness 46 psi) and SDR 26 (pipe stiffness 115 psi).
What standards does TDR PVC® Sewer Series meet?
Pipe and fittings meet ASTM D3034 (SDR 26 and SDR 35), with PVC compound 12454 per ASTM D1784, gaskets per ASTM F477, and installation per ASTM D2321.
What joints and lengths does it use?
TDR PVC® Sewer Series uses gasketed bell-end joints with Rieber gasket technology and is supplied in 14-foot and 20-foot sections.
What is the difference between gravity sewer PVC and pressure PVC pipe?
Gravity sewer PVC pipe (SDR-rated, ASTM D3034) carries wastewater by gravity in non-pressure systems, while pressure PVC pipe is rated for pressurized flow. TDR offers both: TDR PVC® Sewer Series for gravity sewer, and TDR PVC® IPS Series for pressurized potable water.