TDR PRO Corrugated Polypropylene Pipe Panattoni at Premier Industrial Park, TX

Cross-Border Logistics Drainage — Panattoni at Premier, TX

TDR Pipe supplied TDR PRO® corrugated polypropylene pipe for cross-border logistics drainage at Panattoni at Premier Industrial Park, a Class A distribution development on the Laredo, Texas border. TDR provided 15-inch through 36-inch pipe totaling 61,200 linear feet across the site’s underground stormwater network.

Project overview

Panattoni at Premier is a Class A industrial development consisting of two distribution buildings totaling approximately 681,000 sq ft. The site is positioned between the World Trade Bridge and the Colombia Bridge, with direct access to FM 1472 and I-35, supporting high-frequency cross-border freight operations. For a logistics asset built around continuous international freight, all-weather site reliability is non-negotiable—truck routes, dock aprons, and trailer staging have to stay functional through every storm.

The Challenge: Concentrated Runoff on Flat Terrain
Large roof plates and expansive truck courts produce concentrated runoff that is released rapidly during storm events. Flat terrain increases sensitivity to surface ponding, particularly near dock aprons, circulation lanes, and trailer staging areas where uninterrupted access is critical. The stormwater infrastructure needed to maintain rapid conveyance under peak rainfall without restricting truck movements or dock operations, and it had to perform reliably beneath repetitive heavy truck loading while preserving site usability.

The TDR PRO® Corrugated Polypropylene Pipe Solution
An underground stormwater network using corrugated polypropylene TDR PRO® pipe was implemented to manage runoff from the site’s large impervious areas. TDR PRO® provided low-slope hydraulic performance and structural reliability beneath truck courts and paved transport lanes, while allowing flexible routing through varying site alignments. The network used smaller laterals to capture localized runoff near inlets and larger conveyance lines to transport combined flows toward detention. Smooth interior walls supported efficient flow at mild grades, and gasketed joints maintained watertight continuity under heavy pavements—exactly what a high-load logistics environment requires.

Project Value
Consistent stormwater performance reinforced confidence among developers, brokers, and tenants. The drainage system complements freight access and circulation, supporting predictable operations for logistics users dependent on all-weather site reliability. As one of TDR PRO®’s largest single installations at 61,200 linear feet, Panattoni at Premier demonstrates the product’s capacity to serve major industrial infrastructure on the Texas border.

About TDR PRO® Corrugated Polypropylene Pipe
TDR PRO® is a dual-wall corrugated polypropylene (PP) pipe engineered for gravity-flow stormwater drainage. It combines a smooth interior liner for hydraulic efficiency with a reinforced, annular corrugated exterior and a co-extruded integrated bell for watertight joints. Available in 12-inch through 60-inch diameters, TDR PRO® meets ASTM F2881 Class I and AASHTO M330 Type S, with watertight joints tested per ASTM D3212—making it well suited to industrial, commercial, and infrastructure drainage projects across Texas.